Solid Mulchers for Orchards and Sod Farms
B.W. Implement Orchard Mulchers will incorporate wood chips and all organic matter back into the soil and make those pruning chips disappear. At the same time it can eliminate unnecessary passes through the orchard by taking out cracks wheel ruts and other irregularities left during the course of the years. Adjustable to 1″ to 5″ working depth. Available up to 15 foot widths designed and manufactured Dirt Smart for tough west coast conditions.
Orchard Mulchers are ideal for tilling in weeds and smoothing out wheel ruts in orchards. Tilling breaks up the hard soil to increase water penetration. The large 20″ diameter rear roller then slightly compacts and smooths out the orchard floor. An important application for this muicher is to bury wood chips by tilling 1 to 5 inches deep. The wood chips will decompose at a faster rate and the rolled-out orchard floor is then in better condition for the harvesters. ‘The University of California Cooperative Extension recommends keeping woods chips and shredding in the orchards. They also stated that if well managed, prunings can become a source of organic matter and nutrients in the soil. These heavy-duty mulchers are available in several different widths.
Solid Mulchers: Extra heavy duty solid rotor mulcher for mulching on the flat to a depth of 5″. They include a heavy duty 5″ pipe rotor, 3″ x 6″ chrome-faced teeth, UHMW plastic lined hood, 20″ rear roller with scraper and gauge wheels for depth control.
Models
Model # | Description | H.P. Req’d | Weight Appx. |
---|---|---|---|
SM108 | 9 ft. cut – Complete with rear roller and gauge wheels | 75-150 H.P. | 3000# |
SM120 | 10 ft. cut – Complete with rear roller and gauge wheels | 90-150 H.P. | 3075# |
SM144 | 12 ft. cut – Complete with rear roller and gauge wheels | 105-150 H.P. | 3225# |
Other sizes available on request.
Please Call For Custom Bed Top and Furrow Recommendations
Please Call For Custom Bed Top and Furrow Recommendations
Specifications
Features:
- Tilling depth of 1 to 5 inches
- Heavy duty pipe rotor with spiral cutting design
- 3″x 6″ heavy duty chrome welded teeth
- Optional “C” shaped tines
- Adjustable rotor depth contro]
- Cat 2 & 3 ASAE quick hitch compatible
- For 540 or 1000 R.P.M. PTO tractors
- Maximum gearbox capacity – 150 H.-P.
- Ridgid tubular frames
- Replaceable, extremely high wear, non-stick UHMW plastic
rotor hood and tailboard liner - Double #80 chain and sprockets
- Dual adjustable parking stands
- Gauge wheels for added depth control
- Large 20″ diameter rear roller with mud scraper
Please Call For Custom Bed Top and Furrow Recommendations
Optional Equipment
Additional Options:
- C-Tines
- Solid Plate